Diese Seite beschreibt die Technik, um Tails von einem USB-Stick auf dem PC zu starten.

Neustart von Windows 8 oder 10

In Windows oder auf dem Anmeldebildschirm von Windows:

  1. Vergewissern Sie sich, dass Sie Tails mit einer der folgenden Methoden installiert haben:

  2. Klicken Sie auf die Schaltfläche Start .

  3. Halten Sie die Shift-Taste gedrückt, während Sie Power ▸ Restart wählen.

  4. Wählen Sie im Bildschirm Option auswählen die Option Gerät verwenden.

    Wenn der Bildschirm Option auswählen oder die Option Gerät verwenden nicht angezeigt wird, lesen Sie die Anleitung zum Starten von Tails mit der Boot-Menütaste.

  5. Wählen Sie im Bildschirm Gerät verwenden die Option Boot-Menü.

    Windows wird heruntergefahren, der Computer wird neu gestartet, und es wird ein Boot-Menü angezeigt.

    Stecken Sie Ihren Tails-USB-Stick ein, kurz nachdem Sie Boot-Menü gewählt haben und während Windows herunterfährt.

    In Zukunft empfehlen wir Wir, dass Sie Ihren Tails USB-Stick nur einstecken, wenn Windows heruntergefahren ist. Andernfalls könnte ein Virus in Windows Ihren Tails-USB-Stick infizieren und dessen Sicherheit beeinträchtigen.

    Ein solcher Angriff ist theoretisch möglich, in der Praxis jedoch sehr unwahrscheinlich. Wir kennen keinen Virus, der Tails infizieren könnte. Siehe unsere Warnung zum Einstecken von Tails in nicht vertrauenswürdige Systeme.

    Das Boot-Menü ist eine Liste der möglichen Geräte, von denen aus gestartet werden kann. Der folgende Screenshot ist ein Beispiel für ein Boot-Menü:

  6. Wählen Sie im Boot-Menü Ihren USB-Stick aus und drücken Sie Enter.

  7. Wenn der Computer mit Tails startet, erscheint der Boot Loader und Tails startet automatisch nach 4 Sekunden.

    Black screen
('GNU GRUB') with Tails logo and 3 options: 'Tails' and 'Tails
(Troubleshooting Mode)' and 'Tails (External Hard Disk)'.

    • Der Fehlerbehebungsmodus deaktiviert einige Funktionen des Linux-Kernels und könnte auf manchen Computern besser funktionieren. Sie können diese Option ausprobieren, wenn Sie glauben, dass Sie Hardware-Kompatibilitätsfehler beim Starten von Tails haben.

    • Der Eintrag Externe Festplatte ermöglicht den Start von einer externen Festplatte und einige problematische USB-Sticks.

Starting with the Boot Menu key

Die meisten Computer starten nicht automatisch auf dem Tails-USB-Stick, aber Sie können eine Boot-Menü-Taste drücken, um eine Liste der möglichen Geräte anzuzeigen, von denen aus gestartet werden kann.

Wenn Windows 8, 10 oder 11 auch auf dem Computer installiert ist, können Sie stattdessen die Anleitung zum Starten von Tails aus Windows 8 oder 10 verwenden. Tails von Windows aus zu starten ist einfacher als die Verwendung der Boot-Menü-Taste.

Der folgende Screenshot ist ein Beispiel für ein Boot-Menü:

Diese Animation fasst zusammen, wie man mit der Boot-Menü-Taste auf dem USB-Stick startet:

In der folgenden Anleitung wird detailliert erklärt, wie man mit der Taste Boot Menu auf dem USB-Stick startet:

  1. Vergewissern Sie sich, dass Sie Tails mit einer der folgenden Methoden installiert haben:

  2. Fahre den Compter herunter und lasse dabei den USB Stick eingesteckt.

    Shut down the computer and plug in the Tails USB stick.

    Schalten Sie den Computer aus.

    Plug in the other Tails USB stick that you want to install upgrade from.

    Unplug your Tails USB stick while leaving the intermediary USB stick plugged in.

  3. Identify the possible Boot Menu keys for the computer depending on the computer manufacturer in the following list:

    ManufacturerKey
    AcerF12, F9, F2, Esc
    AppleOption
    AsusEsc
    ClevoF7
    DellF12
    FujitsuF12, Esc
    HPF9
    HuaweiF12
    IntelF10
    LenovoF12, Novo
    MSIF11
    SamsungEsc, F12, F2
    SonyF11, Esc, F10
    ToshibaF12
    Others…F12, Esc

    On many computers, a message is displayed very briefly when switching on that also explains how to get to the Boot Menu or edit the BIOS settings.

  4. Schalten Sie den Computer ein.

    Immediately press several times the first possible Boot Menu key identified in step 2.

  5. If the computer starts on another operating system or returns an error message, shut down the computer again and repeat step 3 for all the possible Boot Menu keys identified in step 2.

    If a Boot Menu with a list of devices appears, select your USB stick and press Enter.

  6. Wenn der Computer mit Tails startet, erscheint der Boot Loader und Tails startet automatisch nach 4 Sekunden.

    Black screen
('GNU GRUB') with Tails logo and 3 options: 'Tails' and 'Tails
(Troubleshooting Mode)' and 'Tails (External Hard Disk)'.

Troubleshooting Tails not starting at all

Use this section if the computer does not start from the USB stick and the Boot Loader does not display:

Black screen ('GNU GRUB') with Tails
logo and 3 options: 'Tails' and 'Tails (Troubleshooting Mode)' and 'Tails (External Hard Disk)'.

Verify your Tails USB stick

  1. Wait 2–3 minutes and try again. Some USB sticks need some rest after installing.

  2. Try all other USB ports on the computer. Some USB ports cannot be used to start from.

  3. Vergewissern Sie sich, dass Sie Tails mit einer der folgenden Methoden installiert haben:

  4. Make sure that you have verified your download of Tails.

  5. Make sure that you have verified your download.

  6. Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

  7. Try to install on a different USB stick.

  8. Try to use the same USB stick to start on a different computer.

If you get the following error message in Windows:

The disc image file is corrupted.

Then, you have to install Tails using balenaEtcher.

Check our list of known issues

Similar problems might have been reported already for your computer model in our list of known issues about Tails not starting at all.

Edit the BIOS or UEFI settings (advanced users)

To learn how to edit the BIOS or UEFI settings, search for the user manual of the computer on the support website of the manufacturer.

Take note of the changes that you apply to the BIOS or UEFI settings. That way, you can revert the changes if they prevent the computer from starting on its usual operating system.

In the BIOS or UEFI settings, try to apply the following changes:

  • Make sure that the Boot Menu key is enabled, in your BIOS or UEFI options. This option might be called Boot Device List or something similar, depending on the computer.

  • Edit the Boot Order. You might see an entry for Removable devices or USB media. Move this entry to the top of the list to force the computer to start from the USB stick before starting from the internal hard disk.

  • Disable Fast Boot.

  • Enable CSM Boot.

  • Enable Legacy Boot, in addition to UEFI. The computer might not start anymore on its regular operating system if you disable UEFI completely or if you only enable Legacy boot.

  • Try to upgrade the BIOS or UEFI. To do so, refer to the support website of the computer manufacturer.

Troubleshooting Tails not starting after the Boot Loader

Verwenden Sie diesen Abschnitt, wenn der Bootloader angezeigt wird, aber nicht der Willkommensbildschirm, wenn Sie Tails starten.

Überprüfen Sie Ihren Tails USB-Stick

  1. Wait 2–3 minutes and try again. Some USB sticks need some rest after installing.

  2. Try all other USB ports on the computer. Some USB ports cannot be used to start from.

  3. Vergewissern Sie sich, dass Sie Tails mit einer der folgenden Methoden installiert haben:

  4. Make sure that you have verified your download of Tails.

  5. Make sure that you have verified your download.

  6. Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

    Try to install again on the same USB stick.

  7. Try to install on a different USB stick.

  8. Try to use the same USB stick to start on a different computer.

Versuchen Sie den Eintrag des Fehlerbehebungsmodus

Im Boot-Loader wählen Sie den Eintrag Troubleshooting-Modus, der auf einigen Computern besser funktioniert.

Try the External Hard Disk entry

In the Boot Loader, choose the External Hard Disk entry, if it is available. Some USB sticks need this entry in order to start Tails.

Check our list of known issues